LEDPRO · Flexible linear lighting
Download PDF ↗Neon-Flex Series-3N
RGB · Dome & Flat · 24V
Voltage-controlled RGB colour mixing in a continuous light line. Dome and Flat versions for different light-surface requirements.
Spanningsgestuurde RGB-kleurmenging in een doorlopende lichtlijn. Dome- en Flat-uitvoeringen voor verschillende lichtvlakken.
Key advantages
Uniform light
Continuous illumination without visible LED dots.
Doorlopende verlichting zonder zichtbare LED-punten.
Colour mixing
Voltage-controlled RGB for a choice of mixed colours.
Spanningsgestuurde RGB voor verschillende mengkleuren.
Mounting options
Profiles and connection options for the chosen installation.
Montageprofielen en aansluitmogelijkheden voor de gekozen installatie.
Technical specifications
| Parameter | Specification |
|---|---|
| Voltage | 24V DC |
| Dimensions | Dome 11.5 × 29 mm · Flat 11.5 × 21 mm |
| Construction | UV- and flame-resistant PVC |
| Minimum bend | Ø 120 mm · radius 60 mm |
| IP rating | IP68 · depends on the assembled connection system |
| Weight | 490 g/m (Dome) |
| Storage temperature | −20 to +60 °C |
| Operating ambient temperature | −20 to +45 °C |
| Installation ambient temperature | 0 to +45 °C |
| Warranty in datasheet | 3 years |
| LED type | SMD |
| Beam angle | 160° (Dome) |
*The protection of the complete installation depends on its connectors and assembly. Choose the connection system for the required IP rating.
Available configurations
| Version / colour | Power / m | LEDs / m | Cutting unit | Cut interval | Single-end length |
|---|---|---|---|---|---|
| RGB · 4-wire | 12 W | 60 | 6 LEDs | 100 mm | 10 m dynamic · 7 m static full load |
Dimensions & bend radius
Dimensions
Minimum bend · Ø 120 mm
Bend only in the illustrated direction. Minimum radius: 60 mm. Click a drawing to open the complete technical sheet.
Light output
| Colour | Wavelength / CCT | Lumen / m |
|---|---|---|
| Red | 618–624 nm | >42 lm |
| Green | 522–528 nm | >110 lm |
| Blue | 468–474 nm | >18 lm |
| White (R+G+B) | — | >170 lm |
Specifications, CCT tolerances and optical data — full technical drawing
Connections & accessories
| Image | Connection / accessory | Specification |
|---|---|---|
| Bottom feed | Injection-moulded feed connection · IP67 |
 | Side feed | Injection-moulded connection · IP67 |
| End feed | Injection-moulded connection · IP67 |
| Middle feed | Injection-moulded connection · IP67 |
| End cap | Injection-moulded connection · IP67 |
| Jumper | Injection-moulded connection · IP67 |
| T-feed | Injection-moulded connection · IP67 |
 | Dual-injection Bottom feed | Dual injection-moulded connection · IP68 |
| Dual-injection Side feed | Dual injection-moulded connection · IP68 |
| Dual-injection End feed | Dual injection-moulded connection · IP68 |
| Dual-injection End cap | Dual injection-moulded connection · IP68 |
| Dual-injection Jumper | Dual injection-moulded connection · IP68 |
| Dual-injection T-feed | Dual injection-moulded connection · IP68 |
 | Sleeve front connector | DIY components; see full drawing |
| Sleeve end cap | DIY components; see full drawing |
| Sleeve jumper | DIY components; see full drawing |
| Sleeve T-feed | DIY components; see full drawing |
 | Snap end feed | DIY components; see full drawing |
| Snap side feed | DIY components; see full drawing |
| Snap bottom feed | DIY components; see full drawing |
| Snap end cap | DIY components; see full drawing |
| Snap jumper | DIY components; see full drawing |
| Snap T-feed | DIY components; see full drawing |
 | Anti-wicking ferrule | Limits moisture migration through the cable |
| Male & female connector | Plug-and-play cable joint |
Connection details · sheet 1 — full technical drawing
Connection details · sheet 2 — full technical drawing
Connection details · sheet 3 — full technical drawing
Connection details · sheet 4 — full technical drawing
Connection details · sheet 5 — full technical drawing
Connection details · sheet 6 — full technical drawing
Mounting profiles
| Image | Profile / version | Dimensions & mounting |
|---|---|---|
 | Standard aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Plastic | Dimensions, available lengths and mounting details in the full drawing. |
 | Spring clip aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Bendable stainless steel | Dimensions, available lengths and mounting details in the full drawing. |
 | Cable-exit oriented aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Corner aluminium | Dimensions, available lengths and mounting details in the full drawing. |
 | Recessed mounting | Dimensions, available lengths and mounting details in the full drawing. |
Mounting details · sheet 1 — full technical drawing
Mounting details · sheet 2 — full technical drawing
Mounting details · sheet 3 — full technical drawing
Mounting details · sheet 4 — full technical drawing
Power supply
Select a 24V DC power supply for the connected length and product wattage. Observe the product-specific single-end feed limits and any shorter limits of the chosen connector.
Additional technical reference
Technical reference · sheet 12 — full technical drawing
Discuss your project
Product selection, connection options and mounting advice.
Advies over uitvoering, aansluitingen en montage.
