LEDPRO · Flexible linear lighting
Download PDF ↗Neon-Flex Series-3N
Dome · 24V
A continuous, dot-free light line with a domed light surface. White light and single colours in an 11.5 mm wide profile.
Een doorlopende lichtlijn zonder zichtbare LED-punten, met een bol lichtvlak. Witlicht en vaste kleuren in een profiel van 11,5 mm breed.
Key advantages
Uniform light
Continuous illumination without visible LED dots.
Doorlopende verlichting zonder zichtbare LED-punten.
Domed light surface
A rounded light surface for visible architectural contours.
Een afgerond lichtvlak voor zichtbare architecturale contouren.
Mounting options
Profiles and connection options for the chosen installation.
Montageprofielen en aansluitmogelijkheden voor de gekozen installatie.
Technical specifications
| Parameter | Specification |
|---|---|
| Voltage | 24V DC |
| Dimensions | 11.5 × 29 mm |
| Construction | UV- and flame-resistant PVC |
| Minimum bend | Ø 120 mm · radius 60 mm |
| IP rating | IP68 · depends on the assembled connection system |
| Weight | 490 g/m |
| Storage temperature | −20 to +60 °C |
| Operating ambient temperature | −20 to +45 °C |
| Installation ambient temperature | 0 to +45 °C |
| Warranty in datasheet | 3 years |
| LED type | SMD |
| Beam angle | 160° |
*The protection of the complete installation depends on its connectors and assembly. Choose the connection system for the required IP rating.
Available configurations
| Version / colour | Power / m | LEDs / m | Cutting unit | Cut interval | Single-end length |
|---|---|---|---|---|---|
| Red / Amber / Orange | 8 W | 72 | 9 LEDs | 125 mm | 15 m |
| Green / Blue / White | 12 W | 72 | 6 LEDs | 83.3 mm | 10 m |
Dimensions & bend radius
Dimensions
Minimum bend · Ø 120 mm
Bend only in the illustrated direction. Minimum radius: 60 mm. Click a drawing to open the complete technical sheet.
Light output
| Colour | Wavelength / CCT | Lumen / m |
|---|---|---|
| Red | 618–624 nm | >140 lm |
| Green | 522–528 nm | >280 lm |
| Blue | 468–474 nm | >40 lm |
| Amber | 588–594 nm | >120 lm |
| Orange | 600–606 nm | >90 lm |
| 2200K | White | >340 lm |
| 2700K | White | >340 lm |
| 3000K | White | >340 lm |
| 3500K | White | >380 lm |
| 4000K | White | >380 lm |
| 5700K | White | >380 lm |
Specifications, CCT tolerances and optical data — full technical drawing
Connections & accessories
| Image | Connection / accessory | Specification |
|---|---|---|
| Bottom feed | Injection-moulded feed connection · IP67 |
 | Side feed | Injection-moulded connection · IP67 |
| End feed | Injection-moulded connection · IP67 |
| Middle feed | Injection-moulded connection · IP67 |
| End cap | Injection-moulded connection · IP67 |
| Jumper | Injection-moulded connection · IP67 |
| T-feed | Injection-moulded connection · IP67 |
 | Dual-injection Bottom feed | Dual injection-moulded connection · IP68 |
| Dual-injection Side feed | Dual injection-moulded connection · IP68 |
| Dual-injection End feed | Dual injection-moulded connection · IP68 |
| Dual-injection End cap | Dual injection-moulded connection · IP68 |
| Dual-injection Jumper | Dual injection-moulded connection · IP68 |
| Dual-injection T-feed | Dual injection-moulded connection · IP68 |
 | Sleeve front connector | DIY components; see full drawing |
| Sleeve end cap | DIY components; see full drawing |
| Sleeve jumper | DIY components; see full drawing |
| Sleeve T-feed | DIY components; see full drawing |
 | Snap end feed | DIY components; see full drawing |
| Snap side feed | DIY components; see full drawing |
| Snap bottom feed | DIY components; see full drawing |
| Snap end cap | DIY components; see full drawing |
| Snap jumper | DIY components; see full drawing |
| Snap T-feed | DIY components; see full drawing |
 | Swivel end feed | DIY connector |
| Swivel end cap | DIY termination |
| Anti-wicking ferrule | Limits moisture migration through the cable |
| Male & female connector | Plug-and-play cable joint |
Connection details · sheet 1 — full technical drawing
Connection details · sheet 2 — full technical drawing
Connection details · sheet 3 — full technical drawing
Connection details · sheet 4 — full technical drawing
Connection details · sheet 5 — full technical drawing
Connection details · sheet 6 — full technical drawing
Mounting profiles
| Image | Profile / version | Dimensions & mounting |
|---|---|---|
 | Standard aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Plastic | Dimensions, available lengths and mounting details in the full drawing. |
 | Spring clip aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Bendable stainless steel | Dimensions, available lengths and mounting details in the full drawing. |
 | Cable-exit oriented aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Corner aluminium | Dimensions, available lengths and mounting details in the full drawing. |
 | Recessed mounting | Dimensions, available lengths and mounting details in the full drawing. |
Mounting details · sheet 1 — full technical drawing
Mounting details · sheet 2 — full technical drawing
Mounting details · sheet 3 — full technical drawing
Mounting details · sheet 4 — full technical drawing
Power supply
Select a 24V DC power supply for the connected length and product wattage. Observe the product-specific single-end feed limits and any shorter limits of the chosen connector.
Discuss your project
Product selection, connection options and mounting advice.
Advies over uitvoering, aansluitingen en montage.
