
1617 neon lighting with IP68/IP69 protection. Factory-sealed configurations for underwater applications.
Klik op een productkaart of kies direct een uitvoering.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617-3D-WHT-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81" and horizontal bending diameter: 450mm/17.72".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| Power(W/m W/ft) | 9.6/2.9 |
| LED PIN Temperature | Max. 90°C@Tamin=45°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax =65°C |
| IK | IK10 (with aluminium profile) |
| CRI | Ra ≥90 |
| LED Distance | 8.33mm |
| Minimum cutting unit | 6LEDs(1 unit) |
| Beam Angle | 110° |
| Package Length | ≤40m |

Values beneath colour-temperature columns are luminous flux in lm/m.
| Power (W/m) | 2700K | 3000K | 4000K | Max. Run Length | Unit Cut |
|---|---|---|---|---|---|
| 9.6 W/M | 695 | 713 | 734 | CC 40m | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 40 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617S/HB-SPI-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package length | ≤20m |
| Pixel/M | 12 |
| Control Mode | SPI |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 77 | 5.4W/M | CC 13m | 83.3mm |
| G | 213 | 5.4W/M | CC 13m | 83.3mm |
| B | 47 | 5.4W/M | CC 13m | 83.3mm |
| RGB | 327 | 16W/M | CC 13m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617S/HB-SPI-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 73 | 8W/M | CC 8m | 83.3mm |
| G | 195 | 8W/M | CC 8m | 83.3mm |
| B | 54 | 8W/M | CC 8m | 83.3mm |
| W27 | 258 | 8W/M | CC 8m | 83.3mm |
| W30 | 273 | 8W/M | CC 8m | 83.3mm |
| W40 | 280 | 8W/M | CC 8m | 83.3mm |
| RGBW30 | 530 | 22W/M | CC 8m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617S/HB-DMX-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package length | ≤20m |
| Pixel/M | 12 |
| Control Mode | DMX |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 58 | 7W/M | CV 5m | 83.3mm |
| G | 168 | 7W/M | CV 5m | 83.3mm |
| B | 38 | 7W/M | CV 5m | 83.3mm |
| RGB | 257 | 15W/M | CV 5m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617S/HB-DMX-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| IK | IK10 (With aluminium profile) |
| CRI | Ra ≥80 |
| LED Distance | 11.9mm |
| Pixel/M | 12 |
| Beam Angle | 110° |
| Package Length | ≤20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 44 | 5.8W/M | CV 5m | 83.3mm |
| G | 145 | 5.8W/M | CV 5m | 83.3mm |
| B | 35 | 5.8W/M | CV 5m | 83.3mm |
| W27 | 153 | 5.8W/M | CV 5m | 83.3mm |
| W30 | 164 | 5.8W/M | CV 5m | 83.3mm |
| W40 | 168 | 5.8W/M | CV 5m | 83.3mm |
| RGBW30 | 366 | 15W/M | CV 5m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617S/HB-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package Length | ≤20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 67 | 4.2W/M | CC 11m | 83.3mm |
| G | 190 | 4.2W/M | CC 11m | 83.3mm |
| B | 41 | 4.2W/M | CC 11m | 83.3mm |
| RGB | 292 | 12.8W/M | CC 11m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617S/HB-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| CRI | Ra>80 |
| Package Length | ≤ 20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 61 | 4.25W/M | CC 7m | 83.3mm |
| G | 164 | 4.25W/M | CC 7m | 83.3mm |
| B | 44 | 4.25W/M | CC 7m | 83.3mm |
| W27 | 202 | 4.25W/M | CC 7m | 83.3mm |
| W30 | 212 | 4.25W/M | CC 7m | 83.3mm |
| W40 | 218 | 4.25W/M | CC 7m | 83.3mm |
| RGBW30 | 470 | 17W/M | CC 7m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617S/HB-WHT-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax (Table below) |
| CRI | Ra ≥90 |

| Parameter | LOW output@3000K | Standard output@3000K | High output@3000K |
|---|---|---|---|
| Power(W/m W/ft) | 4.8/1.5 | 9.6/2.9 | 14.4/4.4 |
| Efficacy(lm/W) | 67.9 | 63.5 | 62.0 |
| Max. Ambient tempt.(Tamax) | 65°C | 65°C | 65°C |
Values beneath colour-temperature columns are luminous flux in lm/m.
| Power (W/m) | 2200K | 2700K | 3000K | 3500K | 4000K | 5300K | Max. Run Length | Unit Cut |
|---|---|---|---|---|---|---|---|---|
| 4.8 W/M | 309 | 319 | 326 | 347 | 353 | 341 | CC 26m | 50mm |
| 9.6 W/M | 571 | 605 | 610 | 644 | 648 | 631 | CC 18m | 50mm |
| 14.4 W/M | 833 | 886 | 893 | 940 | 948 | 910 | CC 13m | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617S/HB-TW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Horizontal bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| CRI | Ra>90 |
| LED Distance | 10.2mm |
| Minimum cutting unit | 14LEDs(1 unit) |
| LEDs/M | 196 |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| 2700K | 423 | 6.5W/M | CC 13m | 71.4mm |
| 5300K | 433 | 6.5W/M | CC 13m | 71.4mm |
| 2700K+5300K | 851 | 13W/M | CC 13m | 71.4mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617T/VB-SPI-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package length | ≤20m |
| Pixel/M | 12 |
| Control Mode | SPI |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 100 | 5.4W/M | CC 13m | 83.3mm |
| G | 259 | 5.4W/M | CC 13m | 83.3mm |
| B | 57 | 5.4W/M | CC 13m | 83.3mm |
| RGB | 408 | 16W/M | CC 13m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617T/VB-SPI-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 95 | 8W/M | CC 8m | 83.3mm |
| G | 241 | 8W/M | CC 8m | 83.3mm |
| B | 65 | 8W/M | CC 8m | 83.3mm |
| W27 | 325 | 8W/M | CC 8m | 83.3mm |
| W30 | 340 | 8W/M | CC 8m | 83.3mm |
| W40 | 352 | 8W/M | CC 8m | 83.3mm |
| RGBW30 | 664 | 22W/M | CC 8m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617T/VB-DMX-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package length | ≤20m |
| Pixel/M | 12 |
| Control Mode | DMX |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 80 | 7W/M | CV 5m | 83.3mm |
| G | 224 | 7W/M | CV 5m | 83.3mm |
| B | 50 | 7W/M | CV 5m | 83.3mm |
| RGB | 347 | 15W/M | CV 5m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617T/VB-DMX-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| IK | IK10 (With aluminium profile) |
| CRI | Ra ≥80 |
| LED Distance | 11.9mm |
| Pixel/M | 12 |
| Beam Angle | 110° |
| Package Length | ≤20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 59 | 5.8W/M | CV 5m | 83.3mm |
| G | 177 | 5.8W/M | CV 5m | 83.3mm |
| B | 45 | 5.8W/M | CV 5m | 83.3mm |
| W27 | 196 | 5.8W/M | CV 5m | 83.3mm |
| W30 | 210 | 5.8W/M | CV 5m | 83.3mm |
| W40 | 215 | 5.8W/M | CV 5m | 83.3mm |
| RGBW30 | 482 | 15W/M | CV 5m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617T/VB-RGB-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| Package Length | ≤20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 86 | 4.2W/M | CC 11m | 83.3mm |
| G | 226 | 4.2W/M | CC 11m | 83.3mm |
| B | 48 | 4.2W/M | CC 11m | 83.3mm |
| RGB | 356 | 12.8W/M | CC 11m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617T/VB-RGBW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| LED Distance | 11.9mm |
| Minimum cutting unit | 7LEDs(1 unit) |
| LEDs/M | 84 |
| Beam Angle | 110° |
| CRI | Ra>80 |
| Package Length | ≤ 20m |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| R | 74 | 4.25W/M | CC 7m | 83.3mm |
| G | 198 | 4.25W/M | CC 7m | 83.3mm |
| B | 52 | 4.25W/M | CC 7m | 83.3mm |
| W27 | 268 | 4.25W/M | CC 7m | 83.3mm |
| W30 | 281 | 4.25W/M | CC 7m | 83.3mm |
| W40 | 286 | 4.25W/M | CC 7m | 83.3mm |
| RGBW30 | 590 | 17W/M | CC 7m | 83.3mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
IP68/IP69 · 24 V DC · 16 × 17 mm
NFS2-1617T/VB-WHT-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax (Table below) |
| CRI | Ra ≥90 |

| Parameter | LOW output@3000K | Standard output@3000K | High output@3000K |
|---|---|---|---|
| Power(W/m W/ft) | 4.8/1.5 | 9.6/2.9 | 14.4/4.4 |
| Efficacy(lm/W) | 81.1 | 75.8 | 73.7 |
| Max. Ambient tempt.(Tamax) | 65°C | 65°C | 65°C |
Values beneath colour-temperature columns are luminous flux in lm/m.
| Power (W/m) | 2200K | 2700K | 3000K | 3500K | 4000K | 5300K | Max. Run Length | Unit Cut |
|---|---|---|---|---|---|---|---|---|
| 4.8 W/M | 370 | 382 | 389 | 398 | 413 | 391 | CC 26m | 50mm |
| 9.6 W/M | 651 | 722 | 728 | 766 | 768 | 724 | CC 18m | 50mm |
| 14.4 W/M | 978 | 1056 | 1062 | 1122 | 1126 | 1105 | CC 13m | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
NFS2-1617T/VB-TW-AQUA
24 V DC. Cross-section: 16mm x 17mm / 0.63" x 0.67" (W x H), Vertical bending; minimum bending diameter: 300mm/11.81".

| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 65°Cmax |
| IK | IK10 (With aluminium profile) |
| Ambient Temperature | Tamin=-40°C, Tamax=65°C |
| CRI | Ra>90 |
| LED Distance | 10.2mm |
| Minimum cutting unit | 14LEDs(1 unit) |
| LEDs/M | 196 |

| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Unit Cut |
|---|---|---|---|---|
| 2700K | 502 | 6.5W/M | CC 13m | 71.4mm |
| 5300K | 519 | 6.5W/M | CC 13m | 71.4mm |
| 2700K+5300K | 1021 | 13W/M | CC 13m | 71.4mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Underwater use requires factory-sealed lengths with intact anti-wicking ferrules. Cutting or modifying the seal invalidates the underwater rating. The strip is specified for immersion up to 5 m; the supplied connector and junction-box specifications limit those components to 4 m. Design the complete assembly to its lowest component rating.
1.Max production length 20 meters per reel, and the standard packaging is 5meters per reel. 2.Standard cable length is 3M, if you need cable longer than 3M, please mention us the required cable length. 3.Submerged installation limit: 5 meters. 4.Once cut, or if the anti-wicking ferrule is tampered with, the strip will no longer maintain its IP68 rating and is strictly prohibited for any underwater or submersible applications. Any water damage in such environments will not be covered by the warranty.
Check the compatible variant, pin count and protection rating before ordering. Each accessory code is listed once within this group.
Click an image or installation drawing to enlarge it. Dimensions are retained from the product source.
Send us your required lengths, colour, control method and installation details.
Contact LEDPRO| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |