LEDPRO · Flexible linear lighting
Download PDF ↗Neon-Flex Series-3N
Colorskin · 24V
A coloured jacket that retains its colour when the light is switched off. Available in red, green, blue and yellow versions.
Een gekleurde behuizing die ook bij uitgeschakelde verlichting gekleurd blijft. Verkrijgbaar in rood, groen, blauw en geel.
Key advantages
Uniform light
Continuous illumination without visible LED dots.
Doorlopende verlichting zonder zichtbare LED-punten.
Coloured jacket
The jacket remains coloured with the light switched off.
Ook wanneer het licht uit is, blijft de behuizing gekleurd.
Mounting options
Profiles and connection options for the chosen installation.
Montageprofielen en aansluitmogelijkheden voor de gekozen installatie.
Technical specifications
| Parameter | Specification |
|---|---|
| Voltage | 24V DC |
| Dimensions | 11.5 × 29 mm |
| Construction | UV- and flame-resistant PVC |
| Minimum bend | Ø 120 mm · radius 60 mm |
| IP rating | IP68 / IP65 / IP40 · depends on the assembled connection system |
| Weight | 490 g/m |
| Storage temperature | −20 to +60 °C |
| Operating ambient temperature | −20 to +45 °C |
| Installation ambient temperature | 0 to +45 °C |
| Warranty in datasheet | 3 years |
| LED type | SMD |
| Beam angle | 160° |
*The protection of the complete installation depends on its connectors and assembly. Choose the connection system for the required IP rating.
Available configurations
| Version / colour | Power / m | LEDs / m | Cutting unit | Cut interval | Single-end length |
|---|---|---|---|---|---|
| S3-CS-24V-R · Red | 7.2 W | 60 | 10 LEDs | 166.7 mm | 15 m |
| S3-CS-24V-G/B/Y · Green / Blue / Yellow | 12 W | 60 | 6 LEDs | 100 mm | 10 m |
| S3B-CS-24V-R · Red | 7.2 W | 72 | 9 LEDs | 125 mm | 15 m |
| S3B-CS-24V-G/B/Y · Green / Blue / Yellow | 11 W | 72 | 6 LEDs | 83.3 mm | 10 m |
Dimensions & bend radius
Dimensions
Minimum bend · Ø 120 mm
Bend only in the illustrated direction. Minimum radius: 60 mm. Click a drawing to open the complete technical sheet.
Light output
| Colour | Wavelength / CCT | Lumen / m |
|---|---|---|
| Red | 620–630 nm | >100 lm |
| Green | 520–530 nm | >85 lm |
| Blue | 465–475 nm | >15 lm |
| Yellow 1 | 576 ±1.5 nm | >260 lm |
| Yellow 2 | 578 ±1.5 nm | >260 lm |
| Yellow 3 | 582 ±1.5 nm | >260 lm |
Specifications, CCT tolerances and optical data — full technical drawing
Connections & accessories
| Image | Connection / accessory | Specification |
|---|---|---|
| Bottom feed | Injection-moulded connection |
 | Side feed | Injection-moulded connection |
| End feed | Injection-moulded connection |
| End cap | Injection-moulded termination |
| Dual-injection bottom feed | Dual injection-moulded connection |
| Dual-injection side feed | Dual injection-moulded connection |
| Dual-injection end feed | Dual injection-moulded connection |
 | Dual-injection end cap | Dual injection-moulded termination |
| Sleeve front connector | Sleeve connection; see component list |
| Sleeve end cap | Sleeve connection; see component list |
| Sleeve jumper | Sleeve connection; see component list |
| Sleeve T-feed | Sleeve connection; see component list |
 | Screw front connector | Connection and component details in the full drawing |
| Screw end cap | Connection and component details in the full drawing |
| Screw jumper | Connection and component details in the full drawing |
| Screw T-feed | Connection and component details in the full drawing |
 | Clasp front connector | Connection and component details in the full drawing |
| Clasp end cap | Connection and component details in the full drawing |
| Clasp jumper | Connection and component details in the full drawing |
| Clasp T-feed | Connection and component details in the full drawing |
 | Snap front connector | Connection and component details in the full drawing |
| Snap end cap | Connection and component details in the full drawing |
| Snap jumper | Connection and component details in the full drawing |
| Snap T-feed | Connection and component details in the full drawing |
| Seamless middle connector | Clasp-style middle connection |
| Anti-wicking ferrule | Limits moisture migration through the cable |
Connection details · sheet 1 — full technical drawing
Connection details · sheet 2 — full technical drawing
Connection details · sheet 3 — full technical drawing
Connection details · sheet 4 — full technical drawing
Connection details · sheet 5 — full technical drawing
Connection details · sheet 6 — full technical drawing
Mounting profiles
| Image | Profile / version | Dimensions & mounting |
|---|---|---|
 | Standard aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Plastic | Dimensions, available lengths and mounting details in the full drawing. |
 | Self-locking aluminium | Dimensions, available lengths and mounting details in the full drawing. |
| Self-locking aluminium · version 2 | Dimensions, available lengths and mounting details in the full drawing. |
Mounting details · sheet 1 — full technical drawing
Mounting details · sheet 2 — full technical drawing
Power supply
Select a 24V DC power supply for the connected length and product wattage. Observe the product-specific single-end feed limits and any shorter limits of the chosen connector.
Colour wavelengths and loading chart — full technical drawing
Additional technical reference
Technical reference · sheet 10 — full technical drawing
Discuss your project
Product selection, connection options and mounting advice.
Advies over uitvoering, aansluitingen en montage.
