LEDPRO · Neon-Flex
Neon-Flex Rondo
Ronde Neon-Flex met 360° lichtuitstraling. Kies R13 (Ø 13 mm, IP65) of R25 (Ø 25 mm, IP67). Wit, tunable white, RGB en SPI RGB — afhankelijk van het model.
Product overview
Klik op een foto of kies direct een uitvoering. Profielen en accessoires staan onderaan.
Neon-Flex R13 WHT
01 · R13 WHT↑ Overzicht
R13 WHT
NF-R13-WHT
DC24V with a section size of 13mm/0.51'' in diameter.
- Offering superior flexibility, modern design compared to traditional neon flex.
- Experience 360 o luminous uniformity without any shadow, thanks to its unique optical structure design.
- IP65 protected, UV resistant, chemical resistant, and flame retardant, ensuring durability and safety.
IP6513mm/0.51''24 V DC
Specifications & dimensions
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 60°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax(Table below) |
| CRI | Ra ≥90 |
| Beam Angle | 360° |
| MOQ | 30 meter |
Performance
| Parameter | Standard output |
|---|---|
| Power(W/m W/ft) | 8.6/2.6 |
| Efficacy(lm/W) @3000K | 65.1 |
| Max. Ambient tempt.(Tamax) | 45°C |
Available configurations
Values beneath colour-temperature columns are luminous flux in lm/m.
| Power (W/m) | 2700K | 3000K | 3500K | 4000K | Max.Run Length | Factory increment (confirm) |
|---|---|---|---|---|---|---|
| 8.6W/M | 545 | 560 | 580 | 600 | 5M | Confirm with LEDPRO |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
When ambient temperature reaches 55 °C, the power is suggested to be 5W/M.
Factory-finished lengths only. Do not cut on site. Any increment shown in the table is a factory production increment, not permission for field cutting.
Available finished lengths and factory increment must be confirmed with LEDPRO before ordering.
Connections & wiring
Neon-Flex R25 White
02 · R25 WHT↑ Overzicht
R25 WHT
NF-R25-WHT
DC24V with a section size of 25mm/0.98" in diameter.
- Offering superior flexibility, modern design compared to traditional neon flex.
- Experience 360 o luminous uniformity without any shadow, thanks to its unique optical structure design.
- IP67 protected, UV resistant, chemical resistant, and flame retardant, ensuring durability and safety.
IP6725mm/0.98"24 V DC
Specifications & dimensions
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 60°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax(Table below) |
| CRI | Ra ≥90 |
| LED Distance | 8.33mm |
| Minimum cutting unit | 12 LEDs |
| Beam Angle | 360° |
| Package Length | ≤5m |
| MOQ | 30 meter |
Performance
| Parameter | Standard output |
|---|---|
| Power(W/m W/ft) | 10/3.1 |
| Efficacy(lm/W) @4000K | 73 |
| Max. Ambient tempt.(Tamax) | 45°C |
Available configurations
Values beneath colour-temperature columns are luminous flux in lm/m.
| Power (W/m) | 2700K | 3000K | 3500K | 4000K | Max. Run Length | Factory increment |
|---|---|---|---|---|---|---|
| *10W/M | 727 | 733 | 743 | 744 | 5M | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
When ambient temperature reaches 55 °C, the power is suggested to be 5W/M.
Factory-finished lengths only. Do not cut on site. Any increment shown in the table is a factory production increment, not permission for field cutting.
Connections & wiring
03 · R25 TW↑ Overzicht
R25 TW
NF-R25-TW
DC24V with a section size of 25mm/0.98" in diameter.
- Offering superior flexibility, modern design compared to traditional neon flex.
- Experience 360 o luminous uniformity without any shadow, thanks to its unique optical structure design.
- IP67 protected, UV resistant, chemical resistant, and flame retardant, ensuring durability and safety.
IP6725mm/0.98"24 V DC
Specifications & dimensions
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 60°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax(Table below) |
| CRI | Ra ≥90 |
| Beam Angle | 360° |
| Package Length | ≤5m |
| Power(W/m W/ft) | 10/3.1 |
| MOQ | 30 meter |
Available configurations · Tunable white
| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Factory increment |
|---|---|---|---|---|
| 2700K | 320 | 5W/M | 5M | 50mm |
| 5000K | 340 | 5W/M | 5M | 50mm |
| 2700K+5000K | 660 | 10W/M | 5M | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Factory-finished lengths only. Do not cut on site. Any increment shown in the table is a factory production increment, not permission for field cutting.
Connections & wiring
Neon-Flex R25 RGB
04 · R25 RGB↑ Overzicht
R25 RGB
NF-R25-RGB
DC24V with a section size of 25mm/0.98" in diameter.
- Offering superior flexibility, modern design compared to traditional neon flex.
- Experience 360 o luminous uniformity without any shadow, thanks to its unique optical structure design.
- IP67 protected, UV resistant, chemical resistant, and flame retardant, ensuring durability and safety.
IP6725mm/0.98"24 V DC
Specifications & dimensions
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 60°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax(Table below) |
| Beam Angle | 360° |
| Package Length | ≤5m |
| Power(W/m W/ft) | 10/3.1 |
| Efficacy (lm/W) | 31.5 |
| MOQ | 30 meter |
Available configurations · Tunable white
| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Factory increment |
|---|---|---|---|---|
| R | 70 | 3.3W/M | 5M | 50mm |
| G | 200 | 3.3W/M | 5M | 50mm |
| B | 45 | 3.3W/M | 5M | 50mm |
| RGB | 315 | 10W/M | 5M | 50mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Factory-finished lengths only. Do not cut on site. Any increment shown in the table is a factory production increment, not permission for field cutting.
Connections & wiring
Neon-Flex R25 SPI RGB
05 · R25 SPI RGB↑ Overzicht
R25 SPI RGB
NF-R25-SPI-RGB
DC24V with a section size of 25mm/0.98" in diameter.
- Offering superior flexibility, modern design compared to traditional neon flex.
- Experience 360 o luminous uniformity without any shadow, thanks to its unique optical structure design.
- IP67 protected, UV resistant, chemical resistant, and flame retardant, ensuring durability and safety.
IP6725mm/0.98"24 V DC
Specifications & dimensions
| Parameter | Value |
|---|---|
| Voltage | DC24V (23.5Vmin, 24.5Vmax) |
| LED PIN Temperature | Max. 65°C |
| Storage Temperature | -40°Cmin, 60°Cmax |
| Ambient Temperature | Tamin=-40°C, Tamax=45°C |
| Beam Angle | 360° |
| Package Length | ≤5m |
| Power(W/m W/ft) | 22/6.71 |
| Efficacy (lm/W) | 31.5 |
| Pixel/M | 10 |
| Control Mode | SPI |
| MOQ | 30 meter |
Available configurations · Tunable white
| CCT | Luminous flux (lm/m) | Power (W/m) | Max. Run Length | Factory increment |
|---|---|---|---|---|
| R | 92 | 8W/M | 5M | 100mm |
| G | 320 | 8W/M | 5M | 100mm |
| B | 60 | 8W/M | 5M | 100mm |
| RGB | 441 | 22W/M | 5M | 100mm |
Maximum run lengths refer to single-end feed unless a table explicitly states otherwise. Reel length and maximum powered run are separate specifications. Power and luminous flux may vary by up to 10%.
Factory-finished lengths only. Do not cut on site. Any increment shown in the table is a factory production increment, not permission for field cutting.
Connections & wiring
Profiles & accessoires
Profiles & accessories · R13 & R25
Check the compatible variant, pin count and protection rating before ordering. Each accessory code is listed once within this group.
| View / drawing | Accessory / LEDPRO code | Dimensions & details | Compatible variants |
|---|---|---|---|
 | PC Profile LPS2-221 | Dimension: 1000×15×12.5mm/ 39.37''×0.59''×0.49''(L×W×H) Material: Plastic One set: 1pcs transparent PC profile, 3pcs screws, 3pcs rubber plugs | R13 WHT |
 | PC Mounting Clips LPS2-222 | Dimension: 25×15×12.5mm/ 0.98''×0.59''×0.49''(L×W×H) Material: Plastic One bag: 4pcs PC transparent PC clips, 4 screw, 4pcs rubber plugs | R13 WHT |
  Installation drawing | PC Profile LPS2-200 | Dimension: 1000x29x26mm/ 39.37"x1.14"x1.02"(LxWxH) Material: Plastic One set: 1pcs transparent PC profile, 3pcs screws, 3pcs rubber plugs | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | PC Mounting Clips LPS2-201 | Dimension: 25x30x25.5mm/ 0.98"x1.18"x1"(LxWxH) Material: Plastic One bag: 4pcs PC transparent PC clips, 4 screw, 4pcs rubber plugs | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Closed PC Mounting Clips LPS2-213 | Material: Stainless Steel, PC One Bag: 4 pairs of closed PC clips + 4pcs screw + 4pcs rubber plugs | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Concealed PC Mounting Clips LPS2-215 | Material: PC One Bag: 4 pairs of concealed PC clips + 24pcs screw + 8pcs rubber plugs | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Horizontal Lifting Clip Accessories LPS2-204 | Material: Stainless Steel, PC Wire Length: 1000mm/39.37" One Bag: 2pcs PC clips, 2 sets of hanging wires + screws *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Surface vertical lifting accessories-Fixtures A LPS2-206 | Material:Aluminum Alloy Size:38x41mm One Bag:1 set of black anode parts on AL6061 aluminum surface, 2 pairs of screw plugs *Front cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Horizontal Lifting Profile Accessories LPS2-211 | Material: Stainless Steel, PC Profile/Wire Length: 1000mm/39.37" One Bag: 1pcs PC profile, 2 sets of hanging wires + screws *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Surface U-shaped lifting accessories LPS2-208 | Material: Aluminum Alloy Size:38x41mm One Bag: 2 sets of black anode parts on AL6061 aluminum surface, 4 pairs of screw plugs *Front cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Surface Lifting Closed Clip Accessories LPS2-214 | Material: Stainless Steel, PC One Bag: 2 pairs of closed PC clips, 2 sets of hanging wires, 2 fix-components *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Connector for Side out let LPS2-209-T | Material: PC Size: 30x40mm One Bag: 1 PMMA transparent side outlet connector, 8 pcs Screws(only used in intergated end cap-side cable entry) | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Adjustable Horizontal Lifting Clip Accessories LPS2-217 | Material: PC One Set: 2pcs PC clips , 2pcs fix- components, 2 sets of adjustable rods *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Connector LPS2-210-T | Material: PC Size:30x40mm One Bag: 1 set of PMMA transparent connector, 8 pcs Screws(only used in intergated end cap without wire) | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Adjustable Horizontal Lifting Profile Accessories LPS2-218 | Material: PC Profile Length:1000mm/39.37" One Set: 1pcs PC profile, 2pcs fix- components, 2 sets of adjustable rods *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Connector for Side out let LPS2-209 | Material: Aluminum Alloy Size: 27.6x37mm One Bag: 1 set of black anode accessories on AL6061 aluminum surface, 8pcs screws(only used in intergated end cap-side cable entry) | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Adjustable Horizontal Lifting Closed Clip Accessories LPS2-219 | Material: PC One Set: 2 pairs of closed clips, 2pcs fix- components, 2 sets of adjustable rods *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Connector LPS2-210 | Material: Aluminum Alloy Size:27.6x37mm One Bag: 1 set of black anode accessories on AL6061 aluminum surface, 8pcs screws(only used in intergated end cap without wire) | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
  Installation drawing | Adjustable Horizontal Lifting Concealed Clip Accessories LPS2-220 | Material: PC One Set: 2 pairs of concealed clips , 8pcs screws, 2pcs fix-components, 2 sets of adjustable rods *Side cable entry is required | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW |
| 150 W / 24 V LED driver LPS2-XLG-150-24-A | AC100-305V DC24V 150W IP67, Global certification. Non Dimmable. | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW | |
| 150 W / 24 V driver · 3-in-1 dimming LPS2-ELG-150-24B | AC100-305V DC24V 150W IP67, Global certification 3in1 dimming function: 0-10Vdc, 10V PWM signal and resistance. | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW | |
| 150 W / 24 V driver · DALI dimming LPS2-ELG-150-24DA | AC100-305V DC24V 150W IP67, Global certification Dali control technology. | 4 compatible variantsR25 RGB, R25 SPI RGB, R25 WHT, R25 TW | |
  Installation drawing | Surface Vertical Lifting Accessories - B LPS2-207 | Material: Stainless Steel Wire Length: 1000mm/39.37" One Bag: 1 set of surface vertical lifting accessories, 1pcs screw, 1pcs rubber plug (for 2pin single colors only) *Front cable entry is required | R25 WHT only |
Click an image or installation drawing to enlarge it. Dimensions are retained from the product source.
↑ Overzicht25mm - 360 degree
