Canopy light 1

LEDPRO · Custom Industrial

Lighting a seed germination cabinet

Maatwerk LED-panelen voor een kiemkast van de NAK

Seed samples and young seedlings alongside the illuminated cabinet wall

The germination testHet kiemkrachtonderzoek

At the NAK seed laboratory, analysts germinate seed samples under controlled conditions. They assess the seedlings to determine the germination percentage. The samples sit on trays at several levels inside the cabinet.

In het zaaizaadlaboratorium van de NAK laten analisten zaadmonsters onder gecontroleerde omstandigheden ontkiemen. Ze beoordelen de kiemplanten om het kiempercentage te bepalen. De monsters staan op trays op verschillende hoogten in de kast.

Design requirementsPakket van eisen

Light outputThe panels had to maintain a stable light output throughout each germination test.

LichtopbrengstDe lichtopbrengst moest gedurende de hele kiemproef stabiel blijven.

Light qualityThe light quality had to remain consistent. A high colour rendering index (CRI) was required for natural-looking colours.

LichtkwaliteitDe lichtkwaliteit moest constant blijven. Een hoge kleurweergave-index (CRI) was vereist voor een natuurgetrouwe weergave van kleuren.

Waterproof constructionCondensation forms inside the cabinet. The complete panel had to be waterproof.

Waterdichte uitvoeringIn de kast vormt zich condens. Daarom moest het complete paneel waterdicht zijn.

Dimensions and constructionBoth the dimensions and the panel design had to suit the available space in the cabinet walls.

Maatvoering en constructieZowel de afmetingen als de uitvoering van het paneel moesten aansluiten op de beschikbare ruimte in de zijwanden.

From light selection to installationVan lichtkeuze tot inbouw

Finding the right light took time. LEDPRO selected the LEDs for their colour rendering and the stability of their output. We then had the panels made specifically for this cabinet, matching both their dimensions and their waterproof construction to the application.

Het vinden van het juiste licht vergde tijd. LEDPRO selecteerde de LED’s op kleurweergave en een stabiele lichtopbrengst. Vervolgens lieten we de panelen speciaal voor deze kast maken. Zowel de maatvoering als de waterdichte uitvoering stemden we af op de toepassing.

Rear of the rectangular LED panel fitted into the cabinet frame
Rear view of the custom panel in its frame.
Achterzijde van het maatwerkpaneel in het kastframe.
Open germination cabinet with trays illuminated from the sides
Side-mounted panels illuminate the trays at each level.
De panelen in de zijwanden verlichten de trays op elk niveau.

LEDPRO · Custom Industrial

Neon-Flex Series-4 status lighting on a rotary die cutter

Neon-Flex Series-4 als statusverlichting op een rotatiestansmachine

Design briefPakket van eisen

On this machine for cutting packaging board, operators needed to see the process status from more than one side. The brief called for a colour signal integrated into the enclosure. Green indicates normal operation. If a process fault occurs, the same lines turn red.

Bij deze machine voor het stansen van verpakkingskarton moest de processtatus vanaf meerdere zijden zichtbaar zijn. De opdracht was om de signalering in de omkasting op te nemen. Tijdens normaal bedrijf zijn de lijnen groen. Bij een procesfout kleuren dezelfde lijnen rood.

Rotatiestansmachine met rode lichtlijnen langs de bovenrand en de staanders
Process fault · red outline / Procesfout · rode contourverlichting

Integration into the enclosureVan tekening tot uitvoering

The enclosure drawing defines twelve straight lighting sections. Eight vertical runs follow the uprights. Four horizontal runs follow the upper edges on the operator side, drive side, infeed and outfeed. LEDPRO used custom lengths of Neon-Flex Series-4 to fit each position. The PCB carries red and green LEDs for the two operating states.

De omkastingstekening verdeelt de verlichting over twaalf rechte delen. Acht verticale lijnen volgen de staanders. Vier horizontale lijnen volgen de bovenrand aan de bedieningszijde, aandrijfzijde, invoer en uitvoer. Voor elke positie gebruikte LEDPRO een op maat gemaakt stuk Neon-Flex Series-4. De printplaat (PCB) is voorzien van rode en groene LED’s voor de twee bedrijfstoestanden.

Green / Groen
Normal operation / Normaal bedrijf

Red / Rood
Process fault / Procesfout

Discuss your lighting project

Send us your required lengths, colour, control method and installation details.

Contact LEDPRO
Don`t copy please